Elva Cars Members
http://www.elva.com/forum/

Hard Top to suit Mk4 Courier
http://www.elva.com/forum/viewtopic.php?f=8&t=882
Page 1 of 1

Author:  bmc_thats_me [ Mon Dec 04, 2017 4:30 pm ]
Post subject:  Hard Top to suit Mk4 Courier

I am laying up some hard tops shells to suit Mk4 Courier for a couple of people who requested them, using the mould taken from the roof fitted to E1193, I'm told that this is to the original factory pattern. They are outer shells only with no mountings or screens and will require trimming around the rear portion to match the body. They can be either race or road weight and are £320 collected from Silverstone UK. If anyone had a requirement we would make them now before the mould is again buried away in the store. I also have a complete set of outer body panel moulds for the same if anyone should ever find themselves in need.
Attachment:
hard-top-small.jpg
hard-top-small.jpg [ 140.19 KiB | Viewed 822 times ]

Author:  ElvaRacingRoger [ Wed Dec 06, 2017 11:05 am ]
Post subject:  Re: Hard Top to suit Mk4 Courier

Bruce hasn't shown his contact details ...
Email: info@competitionsupplies.com
Bruce Chambers, Competition Supplies Ltd.
www.competitionsupplies.com

Also ... Bruce has used this supplier for the screen rubbers: https://www.coh-baines.co.uk/products/I ... ofile.html
Bruce commented " let's see if anyone else has a requirement before I bury the mould in the store ", so best not delay if you have any level of interest! Happy Holidays.

Page 1 of 1 All times are UTC
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/