Guys,
Here's pictures of the axles and a double bearing hub. The axles have been delivered, but I can get them made in a short period of time if any one is still interested. I'm also going to have a new alloy flywheel made for my 3 main engine if any one is interested in that project, contact me.
Thanks, Tucker
100/34/L

I got a pair of the axles and they are nice items. Because I am using ELVA SR alloy wheels which have a smaller ID opening than the wheels commonly used I did have to take a little material off the flange and shorten the axles about 1/4" to make them fit, but all is in place and I am looking forward to getting some time on them. Notice in the pictures that the shaft of the axles is turned down from the diameter of the splines and I think this might provide a bit of flex that might take up some of the shock that commonly brakes axles. Thanks, Tucker, for getting this project together.