|Elva Cars Members
|Pictures of axles and hub
|Page 1 of 1|
|Author:||Tucker J [ Mon Jan 31, 2011 3:26 pm ]|
|Post subject:||Pictures of axles and hub|
Here's pictures of the axles and a double bearing hub. The axles have been delivered, but I can get them made in a short period of time if any one is still interested. I'm also going to have a new alloy flywheel made for my 3 main engine if any one is interested in that project, contact me.
|Author:||Michael Oritt [ Thu Feb 17, 2011 1:37 pm ]|
|Post subject:||Re: Pictures of axles and hub|
I got a pair of the axles and they are nice items. Because I am using ELVA SR alloy wheels which have a smaller ID opening than the wheels commonly used I did have to take a little material off the flange and shorten the axles about 1/4" to make them fit, but all is in place and I am looking forward to getting some time on them. Notice in the pictures that the shaft of the axles is turned down from the diameter of the splines and I think this might provide a bit of flex that might take up some of the shock that commonly brakes axles. Thanks, Tucker, for getting this project together.
|Page 1 of 1||All times are UTC|
|Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group